PS4 White Light Issue – Best 7 Solutions to Fix It Easily!

Photo of author

By Jack

Are you noticing a PS4 white light issue and looking for a quick solution to overcome it? If so, you must be desperate to find a solution, don’t you?

Well, this article is composed to explain everything about this issue and the best solutions to address it.

Introduction to PS4 White Light Issue

PS4 White Light Issue

Although it’s connected to the blue light flashing, the PS4 white light flashing usually indicates a less severe issue. Particularly, it points to problems with the TV’s connection, its HDMI port, or the HDMI cable.

That your PS4 isn’t properly connecting to the TV is. Therefore, it’s possible that your TV won’t work at all. You could also see “No Signal” notifications or visuals that are unclear or glitchy. The possible problems you could be experiencing are as follows.

Besides, are you looking for a USB hub for PS4? If so, there’s no need to roam here and there. Read about the best PS4 USB Hubs available out there.

Possible Reasons for This Issue

1. The Issue Can Relate to Your Console’s HDMI Port

PS4 HDMI Port

Particularly speaking, the pins of the port are precariously supported by a thin plastic base, making them fairly vulnerable. The HDMI cable will not function in this situation. Damage to those copper pins inside of the HDMI port will prevent it from functioning.

That means the pins that are pushed out, detached, crooked, bent, etc. That is a common reason for the PS4 white light issue.

It’s also not uncommon to find that the port’s outside metalwork is twisted or wobbly. For this reason, the HDMI cable you have won’t fit into the respective port.

The only way to fix this type of problem is to get a new port. Though the Slim and Pro versions of PS4 have improved ports, they are still susceptible to the same problems.

Also, while playing games on PS4, you may encounter the ‘NAT type failed on PS4‘ error. If you are struggling with this issue, let’s fix it now.

2. An Issue Related to Your Console’s HDMI IC

PS4 HDMI IC

In order to process the signals of HDMI, the motherboard comes with the IC. Eventually, it will burn out and signal a problem by flashing white light on the PS4’s casing.

Unless you have access to a debugger, you’ll need to take your PS4 in for a professional diagnosis. This is true even if the respective port and cable appear to be in good working order.

3. There’s a Power Surge

Power Surge

Another possible culprit is an electrical surge. In particular, it does threaten the electronic components responsible for transmitting the AV signal. There can be power surges, for instance, because of potential electrical surges.

With the HDMI cable that connects your PS4 and TV, the power surge travels through the TV. Also, it may even reach the gaming console. The IC chip could get fried, the ports could get messed up, and resistors or diodes could be harmed. Also, there could even be a random power glitch.

4. Dust, Dirt, and Rust

Dust, Dirt, and Rust

In fact, the accumulation of dust or rust on your PS4 console’s port isn’t a game-breaker. You may be able to fix this by wiping it down with a soft microfiber cloth. You can then blow it dry with an air compressor.

On the other hand, dust can also build up within the PS4. It’s also possible that the HDMI signals are being obstructed because dust has settled inside its circuits.

Changing the CMOS battery on the motherboard is a procedure that requires technical knowledge and special equipment. Because of that, we usually advise against disassembling the PS4 console unless absolutely necessary. As a result, you might want to get the console professionally cleaned.

5. An Issue Related to the Motherboard of the Console

Motherboard of the PS4 Console

There could be a problem with the motherboard causing your issue. This is a systemic issue, and unfortunately, there isn’t any way for you to pinpoint it from where you’re.

A technician is the only one who can tell by comparing your PS4 console’s components to another board.

6. The Controller Device Has Bugs

PS4 Controller Device Has Bugs

The white light issue is occasionally brought on by faulty controller drivers. There is no need to upgrade the firmware on your PS4 controller. However, it often has issues that necessitate resetting the controller. You can’t use your controller with the console because of faulty drivers.

In exchange, it fools the PS4 into thinking the motherboard is broken. The truth, however, is that your console just forgot to update the peripherals automatically.

7. Your Console’s Firmware is Outdated

The console’s firmware could be outdated. It doesn’t happen often, but it can cause unexpected problems. Assume that the PS4 has trouble connecting to the internet or if you are using an unstable internet connection.

In that case, issues like PS4 white light can occur. This indicates that the automated console update did not take place.

Solutions to Fix This Issue

The PlayStation 4’s white light flashing signals is an issue with your console’s HDMI cable or connection.

While most issues require expert help, there are several fixes you can attempt first. Put each one through its paces and see whether you can isolate the problem.

Assume that your PlayStation 4 is still malfunctioning after you have tried the solutions on these “checklists.” So, you should try these solutions. You will need to have it serviced.

1. Clean Your HDMI Port

Clean Your HDMI Port

One of the most practical solutions to address this situation is to check the HDMI port.

Perhaps, your HDMI port can accumulate substances like rust, dust, and dirt. In fact, even a small amount of dirt can make your HDMI port malfunction.

  • It’s possible to use an air blower so you can blow away dirt easily without a physical connection.
  • You can even use a small vacuum cleaner and such the dirt out.
  • Use a soft brush (for instance, a toothbrush) and both ends of the port.
  • Use something like a cue tip so you can clean every part of the port. Make sure that it is done gently without bending or damaging pins.
  • Never use water or any other liquid to clean it up.

2. Check if the Port is Physically Damaged

In addition, make sure the HDMI port is not severely damaged. Problems manifest themselves in the form of bent or damaged pins and metal coverings.

Taking the console in for service to have the port swapped out is necessary upon any visible damage.

3. Use a Different Cable

Use a Different Cable

The white blinking light on the PS4 is typically not connected to external factors such as the HDMI cable. Testing, however, is not only harmless but also quick.

Assume that the television displays the “No signal” warning. That means the connection is not successfully transmitting a message to the PS4 system. However, a flashing white light isn’t appropriate for this issue.

The PS4’s system may mistake a cable’s bending or lean on a pin for a hardware malfunction. Moving your cable until it “clicks” into place on the port might sometimes resolve the issue.

Wiggling the Cable Can Fix the Error

That being said, you can try jiggling your HDMI to fix this specific issue. Or, you can remove or reinsert it on the PS4. Further, you can use your TV to verify the link. You may also try jiggling it in your HDTV connector until you hear the click sound. 

Finally, you may try out different HDMI cables using your PS4 console. Also, you can test your cable using different devices, such as Roku. If that’s the case, you’ll need to invest in a genuine PlayStation 4 HDMI cable.

A standard HDMI cable from today should be compatible with your retro gaming system. To connect a PS4 Pro to a 4K television, though, you’ll need HDMI 2.0 cable. Also problematic is the possibility that you are using the incorrect cable.

4. Power Cycling the Console

Sony suggests rebooting the system as a next step.

If you recognize a power failure to be the problem, it will eliminate any number of seemingly random issues.

  • Turn off the faulty console
  • Unplug the device from the cables
  • Wait at least 5 minutes.
  • Get the cables reconnected
  • See how it works

5. Synchronize the Controller Automatically

As of this stage, you have made sure that your HDMI port is fine. So, now it is time to pay attention to controller-related issues.

First, you should ensure that the controller is synchronized automatically.

  • Switch off your console to proceed.
  • Press both Share and PS buttons simultaneously.
Synchronize the Controller Automatically
  • Wait for a couple of seconds so the PS4 will be turned on. Now, you should see if the issue is fixed.

6. Reset the Firmware

Mentioned below are the steps to reset firmware and fix the PS4 white light issue.

  • Switch off the console.
  • Get a hairpin and push the small button located at the rear of the controller. This button is located in a small hole. Make sure that you hold the button for seven seconds.
Reset the Firmware
  • Now, you should connect the controller and the console using your USB cable.
  • Turn your PS4 off.
  • Press the console’s PS button.
Press the console's PS button

Now, you should check if the White Light on the PS4 issue is gone.

7. Reset Your Console with Safe Mode

If nothing has worked so far, try to reset the console with Safe Mode.

  • Find a flash drive that has 6GB of free space.
  • Format it using exFAT or FAT32 mode.
Format PS4
  • Now, select the “Update” option in the PS4 folder located in the drive.
  • You can download the system software for PS4 using Sony’s official web page. Select the option called “Reinstall System Software.”
  • Now, you should save the option called “PS4UPDATE.PUP“. You can see it in the subfolder named “Update.”

Then, you can reinstall the same file on the console’s safe mode.

  • Turn off the console.
  • Unplug the cable and leave it for about 5 minutes.
  • Now, you should insert the USB stick and reinstall that file.
  • After that, plug your power cable in rather than the HDMI.
  • Press the power button and hold it for about seven seconds. You will hear a second beep, and that’s an indication of entering the power mode.
  • Use your HDMI cable and connect the TV and the console. Continue with the steps to reset your console.
  • Now, connect the console’s controller using a USB cable. Press the PS button.
PS4 Safe Mode
  • Select “Initialize PS4” (that’s the 7th option).
Reset Your Console with Safe Mode
  • Select “Update from USB” and hit “OK.”

Restart the device and see if the issue is gone.

So, that’s how to fix the PS4 white light error. Do you have other doubts about this matter? Please let us know.

Leave a Comment