DNS_PROBE_FINISHED_NO_INTERNET can be a pretty annoying error at a glance. However, you are not the only one who encountered this error.
The good news is that this error can be fixed, and you don’t have to get a technician to fix it.
All you need is to read this article and try the fixes we have explained.
What is DNS_PROBE_FINISHED_NO_INTERNET Error?
Before we get into the solutions, let’s get an idea about the DNS_PROBE_FINISHED_NO_INTERNET error.
If you see this error on your computer, that means your computer doesn’t have an internet connection. You cannot necessarily access any web page or any other online content from the computer that experiences this error.
This error is not rare at all. However, the interesting part about this error is that it doesn’t tell how the error occurred. Or it doesn’t give you an idea about the root cause of the error. Instead, the error says that there is no internet.
Therefore, you should try your best to fix this error. In other words, you will have to try a couple of solutions to get it fixed.
PS: learn more about how to set up Netgear parental controls.
Solution 1: Change the TCP/IP4 DNS Server Address on Your Computer
You will have to work on the TCP/IP4 DNS server address as the first solution. Changing the TCP/IP4 DNS server address has worked for many individuals.
So, we recommend this solution first and see if you can overcome the DNS_PROBE_FINISHED_NO_INTERNET issue.
Please follow the below guide to get it done.
First, you should enter the text “network” in the search box on the “Start Menu.” Once the search list appears, you should choose the “Network Status” option.
You can now click on the option called “Change Adapter.”
Now, you should right-click on the option “Local Area Connection” or “Ethernet.” This will depend on the type of connection you have. Once you have clicked it, you should choose the “Properties” option.
You can see an option called “Internet Protocol Version 4(TCP/IPv4).” Just double-click on it. Then, you should tick the option “Use the following DNS server addresses.” After that, you can set Google Public DNS as your DNS server.
The Preferred DNS Server should be: 18.104.22.168
The Alternate DNS Server should be: 22.214.171.124
After getting those configurations right, just click on the button called OK.
You can now launch your Chrome browser and see if you can access the internet smoothly. If it is possible, you have successfully fixed it. If not, don’t panic. There are other solutions you should try.
Besides, click here to figure out how to fix errors like err_cert_date_invalid.
Solution 2: Use the Command Prompt
If the above option hasn’t worked for you, try this method that uses the command prompt. Although this method involves typing some commands, it can be effective, so you can try it.
Also, it doesn’t incur additional costs, so it is always worth trying. Just follow up to get it done.
First, you should open the “Run” box by pressing the “Windows” + “R” keys on the keyboard. Then, you should enter the text “CMD” and hit “Ctrl” + “Shift” + “Enter.”
If not, you can hit the Windows key and type “CMD” in the search box so that the CMD option will appear. Once it appears, you should right-click on it and select “Run as Administrator.”
Either way, you will enter the command prompt in administrator mode. When the message is prompted, you should click on “Yes” to open it.
Once the command prompt is opened, you can enter the commands below in the window. After typing each line, you must remember to hit the “Enter” key.
netsh int ip set dns
netsh Winsock reset
That’s it. You should now restart the computer. Launch your Chrome browser now and see if you can access the internet without any issues.
Solution 3: Ge the Network Adapter Driver Updated
Sometimes, the DNS_PROBE_FINISHED_NO_INTERNET issue can emerge due to an outdated or wrong network adapter driver.
If that is the case with you, the only solution is to update the existing network adapter driver. If none of the above ways have worked for you, this might be a good solution.
Solution 4: Check Your Connectivity
Sometimes, you may experience the DNS_PROBE_FINISHED_NO_INTERNET issue because you don’t have an active internet connection. This can happen when your router, modem, or any other device that connects you to the ISP doesn’t work.
So, it will be important to check if the connection is working properly. If you use a Wi-Fi connection, connect a different device to the same network.
Then, try to launch a web page and see if it works. If it doesn’t, the issue is related to the network. If it works, the issue is associated with the previous device. And if it does not work, you should speak to your ISP and get it solved.
If the internet connection works fine, you should also test it through the computer. To do that, follow the steps below.
Press the “Windows” key and the “R” key simultaneously on the keyboard.
That will open up the “Run” command. You can type “CMD” text and hit “Enter.”
This will launch the command-line interface. Once it is opened, you should enter the command “ping -t 126.96.36.199” and hit the “Enter” key.
Once you do that, it will display a set of the line as follows, one by one.
Reply from 188.8.131.52: bytes=32 time=193ms TTL=53
Reply from 184.108.40.206: bytes=32 time=193ms TTL=53
Reply from 220.127.116.11: bytes=32 time=192ms TTL=53
If you see those lines, the internet connection is fine. The last digits of those lines can differ. However, the formation of the lines is what you see above.
If, by any chance, it shows the text “Request Times Out,” there is something wrong with the connection. In that case, you should see if the wireless or wired connection is properly connected.
So, keep the window above open and perform the steps below. Meanwhile, you should check if something gets changed in the lines. If you see replies, that means the issue is fixed.
Step 01. Check if the Router Has the Internet
If it does, the issue can relate to the software. In this case, you should try the steps below.
Go to a NEW COMMAND PROMPT WINDOW. You must not close the existing window that performs pining. You should do this by hitting the “Windows” key and typing the text “CMD.”
Once the “Start Menu” displays the “CMD” icon, right-click on it. Then, you should choose the option called “Run As Administrator.”
You can enter the following lines when the new command prompt window opens up. You must hit “Enter” after typing each line. They are five separate commands.
netsh int ip reset C:\resetlog.txt
netsh winsock reset
Check if your computer is getting a connection. See if the command prompt on the other window gets replies. If not, try the next step as well.
Step 02: Perform a Power Cycle
If the previous option doesn’t deliver any positive results, you should also try this method. Mentioned below are the steps to Power Cycle the router.
- First, turn off the router and the modem connected to your faulty computer.
- Leave it for about 10 minutes alone and switch it on.
- Check if the computer is connected to the same router (Wi-Fi or wired).
- Check the command prompt (previously opened) ad see if it gets any reply. You should check it for about 2 minutes. If nothing happens, please move to the next step.
Solution 5: Reset Your Chrome Browser
Even if this step has no relationship with the previous one, this is a recommended solution. Here are the steps to perform this method.
Press the “Windows” + “R” keys together.
Once the “Run” box appears, enter the following lines based on the OS you use.
- For Windows XP: %USERPROFILE%\Local Settings\Application Data\Google\Chrome\User Data\
- For Windows 7 or newer: %LOCALAPPDATA%\Google\Chrome\User Data\
Hit OK now. Once Windows Explorer is opened, you should right-click on the default folder. Choose “Rename” and enter the name “default.old.” If it doesn’t work with the first shot, reboot the computer and try it again.
That’s it. DNS_PROBE_FINISHED_NO_INTERNET should be fixed by now.